Just as we knew, MT-Card is the world first flash kit to support
multi 3ds roms to allow users to play more 3ds games at one
time.Yesterday, the mt-card team released a new firmware V1.1 for
mt-card hardware and software. The v1.1 firmware update allow users to
play v7.1 3ds games on N3DS V4.5-4.1 and following is a detailed guide
on how to use MT-Card play v7.1 3ds games on N3DS V4.5-4.1.
Prepared Things
1.2 micro sd card, one is used to put kernel firmware,the other one is used to put 3ds games.
2.MT-card ( if you need, you can buy it from modchipfactory.com : buy mt-card
)
Steps
1. Download the latest kernel firmware from mt-card.com ,unzip it,open the folder ,then transfer launcher.dat to SD card, insert the SD card into the console, switch on the
console.
2.Here on the console screen, select”system settings”, then “other settings”, and then “profile”, and lastly”nintendo DS profile”(Press L button).
3.Enter into MT card menu
4.
Function of “Go MT card Menu”: Select this option, press “A” to exit,
rom and high verion games can be played on 3DS. Insert the MT card into
the console ,then you can switch games by pressing MT card built-in key
5.
Function
of “Go Classic Menu”: Select this option, press “A’ to exit, games of
official cart supported, and after updating virtual system with version
7.1, all games of officical carts supported, and region free!
6.
Function
of “ Select Game”: Select this option, press “A” . press “ up” and
“down’ for files selecting, press “right” and “left” for page up and
page down, then press”A” to confirm the selected files and then exit
7.
Function
of “Backup Nand”: Select this option, press “A” to backup.Press “B” to
cancel, press “START” to backup 。When the progress bar is up to 100%,
pop-up green letters”finished”, then press “A” or “B” to exit.
8.
Function
of “Format Emu Nand”: select this option, press “A’ to format Nand
press START to continue , press other key to exit. Press B to format the
SD card, and all files on SD card will be lost. When the progress bar
is up to 100%, pop-up green letters”finished”, then press “A” or “B” to
exit.
9 . Regarding to the NAND-emulate system updatable function: Follow step 1 to step 4, as above mentioned, then go MT card menu, press A to exit, and back to “System Settings” to check the system version.
For system verison “MT3D X.X.X-XX”, system is updatable, but it must be finished under “system setting” interface, select ”system update”, turn on Wifi to update the system according to the instruction. You can just update the virtual system under “system setting” interface. If to update the NAND-emulate system under “Eshop” interface, the console system will be with update verion over 4.5, MT card could on work on that.
10. About Eshop: When NAND-emulate system update finished, follow step 1 to step 4, as above mentioned, then go MT card menu, press A to exit, then go Eshop, it works with no problem, if system reminds you new system update availlable when you are on Eshop, just ingnore it and follow instruction of step 10 for system update installation.
Prepared Things
1.2 micro sd card, one is used to put kernel firmware,the other one is used to put 3ds games.
2.MT-card ( if you need, you can buy it from modchipfactory.com : buy mt-card
)
Steps
1. Download the latest kernel firmware from mt-card.com ,unzip it,open the folder ,then transfer launcher.dat to SD card, insert the SD card into the console, switch on the
console.
2.Here on the console screen, select”system settings”, then “other settings”, and then “profile”, and lastly”nintendo DS profile”(Press L button).
3.Enter into MT card menu
4.
Function of “Go MT card Menu”: Select this option, press “A” to exit,
rom and high verion games can be played on 3DS. Insert the MT card into
the console ,then you can switch games by pressing MT card built-in key5.
Function
of “Go Classic Menu”: Select this option, press “A’ to exit, games of
official cart supported, and after updating virtual system with version
7.1, all games of officical carts supported, and region free!6.
Function
of “ Select Game”: Select this option, press “A” . press “ up” and
“down’ for files selecting, press “right” and “left” for page up and
page down, then press”A” to confirm the selected files and then exit7.
Function
of “Backup Nand”: Select this option, press “A” to backup.Press “B” to
cancel, press “START” to backup 。When the progress bar is up to 100%,
pop-up green letters”finished”, then press “A” or “B” to exit.8.
Function
of “Format Emu Nand”: select this option, press “A’ to format Nand
press START to continue , press other key to exit. Press B to format the
SD card, and all files on SD card will be lost. When the progress bar
is up to 100%, pop-up green letters”finished”, then press “A” or “B” to
exit.9 . Regarding to the NAND-emulate system updatable function: Follow step 1 to step 4, as above mentioned, then go MT card menu, press A to exit, and back to “System Settings” to check the system version.
For system verison “MT3D X.X.X-XX”, system is updatable, but it must be finished under “system setting” interface, select ”system update”, turn on Wifi to update the system according to the instruction. You can just update the virtual system under “system setting” interface. If to update the NAND-emulate system under “Eshop” interface, the console system will be with update verion over 4.5, MT card could on work on that.
10. About Eshop: When NAND-emulate system update finished, follow step 1 to step 4, as above mentioned, then go MT card menu, press A to exit, then go Eshop, it works with no problem, if system reminds you new system update availlable when you are on Eshop, just ingnore it and follow instruction of step 10 for system update installation.
No comments:
Post a Comment